Product Description :
Superfoam Gun with CFC-free propellant is a one-component,
self expanding,
ready to use polyurethane foam,
for use with a metal foam applicator gun.
Contains propellants which are
completely harmless to the ozone layer.
Characteristics :
- excellent adhesion on most materials (except PE/PP)
- high thermical and accustical isolation
- very good filling capacities
- excellent mounting capacities
- excellent stability (no shrink or post expansion)
- very precise application due to the
foam gun system
Applications :
- installing of window and doorframes
- filling of cavities
- sealing of all openings in roof constructions
- creation of a soundproof screen
Application Examples :
- mounting and sealing of window and doorframes
- filling of cavities around pipes
- connecting of isolation materials and roof constructions
- application of a soundproofing layer on motors
- improving thermical isolation in cooling systems
Packaging and Colours :
Colour :
Champagne
Packaging : Aerosol can of 750 ML net
Qualities : Firerating B3 (DIN 4102)
Shelf life :
12 months in an unopened packaging in a dry and cool storage
place
Technical Data:
Base : Polyurethane
Consistency : Stable Foam
Curing System : Moisture Cure
Skin Formation : 8 min at 20°C/60% R.H
Drying Time : dust free after 20-25 min
Curing Rate : 1 h for a 50 mm bead
Foam Yield : 1000 ml yields 35-40 l foam
Shrinkage :
none
Post expansion
: none
Cellular Structure : ca 70-80 % closed cells
Specific Gravity : ca 25 kg/m³(extruded)
Temperature Resistance : -40°C until +90°C (cured)
Character of Foam : thixotropic, does not slump
Fire Class : B3(DIN 4102 part 2)
Insulation Factor : 33 mW/meter Kelvin
Dielectrical Constant : 1.091
Specific Resistance : 5,4 x 10
Ohm
x cm
Shear strength : ca 15 N/cm² - DIN 53427
Pressure strength : ca 5 N/cm² - DIN 53421
Bowing strength : ca 7 N/cm² - DIN 53423
Water absorbtion : 1% Vol. (DIN 53429)
Surfaces :
Substrate : all substrates except PE, PP
State of Surface : clean, free of dust and grease
Preparation : moistening of the surfaces improves
adhesion, curing and cellular structure
Application :
Application Method : shake
aerosol can thoroughly before application.
Application Temperature: + 5°C until + 30°C
Clean with : Foam cleaner before
foam cures
Repair with : Superfoam Gun
Transport Information :
Road : ADR : 2.5a RandNr 2210
Maritime : IMDG : Class 2, aerosol, UNNO 1950
Air : ICAO/IATA-DGR : aerosol, 2+6.1 Pkg Grp III
UN Number : 1950
Labelling :
Symbol : Xn - harmful, F-easily inflammable
R-Sentences : 20, 42 36/37/38
S-Sentences : 26, 28, 38, 45
contains : Difenylmethane -4,4' diisocyanate
others :
Contains Isocyanates. See instructions of the
manufacturer. Recipient under pressure. Protect from direct sunlight and do not expose
to temperatures above 50°C. Do not pierce or burn after use. Do not extrude
towards open fire or hot surfaces. Keep away from ignition sources - do not smoke.
Keep out of reach of children. When application is insufficiently ventilated
an explosive air-vapour mixture can be formed.
Safety Measures :
- Apply the usual industrial hygiene.
- wear gloves and safety gogges
- remove cured foam by mechanical means only, never burn away
!
Remarks :
- Always moisten surfaces before application in order to
improve curing and cellular structure.
- Cured PU Foam must be protected from UV radiation by
painting or by applying a top
layer of sealants (silicone, MS
Polymer, etc).
