|
|
|
WE HAVE NOW MOVED TO A NEW WEBSITE PLEASE CLICK HERE |
|
|
|
WE HAVE NOW MOVED TO A NEW WEBSITE PLEASE CLICK HERE |
|
- Frequently Asked Questions -
What is this stuff?
Technical Data Sheets:
Video Section "We checked out the website - looked at the videos - and thought 'I can do that!' ..... and we did!! We placed an online order, the goods came within the week, so at the weekend we did the job.
It was all in the preparation .....before we
used the quick cure formula -
"it does exactly what it says on the tin" as they say!
We are well pleased with both the product and
would recommend the company to all.
Greg & Sarah Mallinson
West Yorkshire."
Just wanted to say what a great product you have - we followed all the instruction you gave and found the product does exactly what it says it will. The foam went on a dream locked all our tiles in place and insulated the loft. We are now warm and water tight. We have told many people how impressed we are with your company from the moment we ordered to how quick the goods arrived and how clear the instructions were.
Very impressed |
Handi-Foam® is a multiple purpose two-component polyurethane foam system. The pre-pressurized, portable two component foam systems are dispensed through the state-of-the-art Handi-Gun® two component dispensing gun, providing unsurpassed quality and flexibility in end-use performance.
Handi-Foam®
is the best form of insulation available, because of its closed compact
cellular structure.  as other forms of insulation such as
glass fibre , expanded polystyrene and rockwool®.Spray Handi-Foam® onto any clean, dry surface in any direction to insulate, fill and seal various size voids, dampen sound or reduce vibration. It is specifically designed to spray onto flat or irregular surfaces, and to fill large cavities. Handi-Foam® 'Quick Cure' fully expands and dries tack-free within seconds. Cut able in 2-5 minutes. Handi-Foam® Two-component foam systems expand with approximately an 8-to-1 ratio, and cure to a semi-rigid closed cell foam upon the chemical reaction of component A (a polymeric isocyanate) with component B (a polyol blend containing certain additives). Handi-Foam® adheres to almost all building materials with the exception of surfaces such as polyethylene, Teflon ®, silicone, oils and greases, mould release agents, and similar materials.Optimal application temperature is 24°C (75°F) but
may be sprayed onto colder or warmer substrates, with slight effects on the
foam characteristics. Cured foam is resistant to heat and cold, -129°C to
+93°C (-200°F to +200°F), and to aging, but not UV rays unless painted,
covered or coated. Cured foam is also chemically inert and non-reactive in
approved applications.
Handi-Foam ® systems require no outside mechanical or electrical power source and are disposable & refillable. Handi-Foam® is available in various kit sizes to meet specific job application requirements. When sprayed, the foam will create a seamless, continuous seal to insulate and protect against dust, air infiltration, pests, etc.
 Spraying expanding insulation foam is so much faster and easier than cutting up traditional sheets of insulation and it also does not leave an air gap. Labour time and costs can be dramatically reduced.
|
 |
 |
  |
|
||
